GUYUE Professional Knife Sharpening Stone Set,Professional Whetstone Sharpener,Premium 4 Side Grit 400/1000 3000/8000 Water Stone,Flattening Stone,Non-Slip Bamboo Base,Chisel Honing Guide.

Material: Corundum
Brand: H G GUYUE
Colour: White
Product dimensions: 23L x 21W x 7H centimetres
Item weight: 2.18 Kilograms

★Contents of the kit: the GUYUE Sharpening Stone kit is equipped with a double-sided, high-quality sharpening stone (# 400/# 1,000 and # 3,000/# 8,000 for each side), two anti-skid pads, a bamboo base for fixing stone materials, and an angle guide plate for the sharpener.a honing guide,a flattening stone,a polishing compound,a leather honing strop,a leather razor strop.
★Re-sharpening: the dull knife is the bane of every chef, which makes it unnecessarily difficult to chop and cut. Now, they only need to use the Sharpening Stone once to re-sharpen the dull knife or damaged blade. After that, they can get higher productivity by cutting meat, vegetables, cheese and bread faster, and also make food preparation easier.
★Repairing the used sharpening stone: as time goes by, the sharpening stone will naturally become uneven, making perfect cutting almost impossible. By using GUYUE Stone, you can keep your sharpening stone flawless and ready for use in just a few minutes.
★Easy & safe to use:You can get started quickly even if you have never sharpen any knife, this knife sharpener stone use water for sharpening instead of expensive sharpening oil. The angle guider holds the knife on the correct angle which makes the process easy and very effective.Correction stone is used to level the uneven surface caused due to repeated use, making it flat.
★Sales return guaranteed: 100% Satisfaction Service guarantees no risk. If you are not satisfied with our GUYUE Sharpening Stone, please contact us within 30 days for a full refund without any worries. Try now with no risk.

Impeccable sharpening tool

4-side sharpening stone of various mesh numbers will be used. With it, you can repair notched knives and maintain very blunt knives, tools, non-serrated and non-ceramic blades, and there will be no problem. At the same time, you can use a black flattening stone to keep the surface of the grindstone flat.Attention:（The flattening stone also needs to be soaked in water for 10 minutes with the stones before flattening.）

This buffing compound meets all your polishing needs.Apply the compound by rubbing, cover the entire leather surface with the polish, place the blade on the leather, with light pressure push the blade up towards the top of the strip to ensure the sharpest edge.

Made of the best quality cowhide, used for final polishing and smoothing after sharpening. Fix the front end somewhere, hold the other end with one hand, and rub the razor on it back and forth by putting your strength on the back of the razor.

Choose Your Own Angle – All standard sharpening angles can be achieved using this sharpening jig by adjusting the tool projection. Projection measurements for 25° and 30° angles are conveniently located on the packaging and on the cast aluminum body of the tool.

-Before the sharpening stone is used, it shall be put into the water for about 5-10 minutes until there are no bubbles come out.

-The blade shall point in your direction. Please grind the blade from its edge. Keep the angle between the sharpening stone and the blade at 15-20 degrees. Attention: （Please touch the blade with your finger after grinding several times. If it gets stuck, please finish grinding.）

-Grind the middle of the blade and sharpen it several times, then, touch it with your finger and check the blade, and then return you finger.

-Grind the lower jaw. Don't grind too hard, just grind lightly.

-Grind the blade until the whole blade has become smooth when you touch the blade with your finger.