Sovol Klipper 3D Printer Max Print Speed 500mm/s 300℃ High Temp 600W Meanwell Power Supply 420W Hotbed 5 inch Touch Screen Planetary Direct Drive Auto Leveling

Brand: Sovol
Material: Aluminium
Colour: Black+Blue
Product dimensions: 64D x 60W x 25.5H centimetres
Item weight: 14.54 Kilograms

【Max Print Speed 500mm/s】Klipper firmware allows SV07 Plus to speed up to 500mm/s at Maximum. SV07 Plus is equipped with 480x800 high resolution 5 inch touch screen which brings you totally different experience from knob screen and normal 4.3inch touch screen in the market. Klipper also offers a range of function options, including the height map and input shaper, while you could DIY based on your specific needs.
【High Flow Hotend Achieves 300℃ Printing】All-metal hotend comes with a larger melt zone, which offers high flow up to 20-30mm³/s that greatly reduces the possibility of clogging. An extra large fan at the rear of the extruder offers triple airflows to quickly cool prints and ensures good layering for better results. It makes the high speed and high temperature possible at the same time. No more PTFE replacements or firmware flashes needed to print with different materials easily, like ABS, Nylon
【Larger Print Volume & Heating Faster】Equipped with 600W Meanwell Power supply, SV07 Plus brings super excellent and stable heating performance. Upgraded 420W heated bed can be heated to 60℃ in 90 seconds, which is 30 seconds faster at least than most printers in the market ( All sizes ). If you own a SV07 Plus, not only you own a 300x300x350mm larger print volume printer, but also you get super faster heating speed and printing speed.
【Planetary Dual Gear Direct Drive Extruder】 With Sovol's self-developed Direct Drive Extruder that comes with planetary dual gear set, SV07 Plus offers a higher drive ratio and lighter motor for precise extrusion. We also have added a large external knob to make feeding easier, so you can focus on your printing project with minimal interruptions.
【25-point Bed Leveling】SV07 Plus features 25-point auto leveling with an inductive sensor to detect and compensate for unevenness in the heated bed. This precise and smart technology makes it possible to get a fantastic first layer. Note: Set initial layer height to 0.3mm when slicing will help you get optimal results. If you have any adhension issue we recommend you to wipe the PEI surface with alcohol before the next printing.
【Customer Service】Sovol 3d printers come with one-year warranty and lifetime technical support. Any question about Sovol SV07 3D printer, just click "Ask a question" through our storefront's page, report an issue through the "Your Orders" page. We will fast respond within 24 hours and try our best to resolve your every issue.

Zoom

Add

Add to cart

Buy it now

5 inch Touchscreen with Klipper Firmware

Embedded with the ARM A53 64-Bit main frequency quad-core processor, the SV07 PLUS presents you with a fast printing experience of up to 500mm/s (Recommended Print Speed at 250mm/s). Advanced features like Input Shaping and Pressure Advance ensure speedy printing in excellent quality

Large Printing Volume

SV07 PLUS 3D printer comes with a 300x300x350mm/11.81x11.81x13.78 inches build volume, adequate space great for larger models printing or batch printing with efficiency.

MeanWell 600W Power Supply

Built in the best power supply providing stable and sufficient power to the printer. Greater power also help shorten the hotbed and nozzle heat time.

All Metal High Flow Hotend, Max Nozzle Temp 300°

All Meltal hotend with larger melt zone enables us to print at fast speed and various materials, satifies your demand for high temp and high speed.

Auto Leveling

SV07 uses inductive sensor to detect the metal print bed with 25 points, automatically and compensate the unevennes of the hotbed. The fast,smart and precise detection to help you get the bed levelled perfectly and get a fantastic first layer.

Filament Run-out Sensor

It will pause the printing automatically if you run out of your filament or if the filament is broken.

All Metal Planetary Dual Gear Direct Drive Extruder

Sovol Self-Developed all-metal direct drive extruder with dual gear, provides the SV07 PLUS with a higher drive ratio and a lighter motor, making extrusion more accurate and printing flexible and elastic material easier.

Triple Fan Cooling

Unlike previous Sovol printers, the SV07 PLUS added a large cooling fan behind the print head which helps to ensure the quality of the final build under fast printing speed.

G34 Auto Z Align

As UART mode is opened on SV07 Plus mainboard, and G34 updated, the SV07 Plus has G34 Auto Z align function. If you want to level X axis, all you need to do is click Auto Z-Align, and the printer will process X-axis levelling automatically. Saving time and effort.

STM32 Silent Mainboard with TMC2209 Driver

It has higher torque and faster acceleration, 4 layers, better cooling, strong anti-interference ability and also features a type C connection.